GUILDER MODEL BUILDER— During the 1930s Mr. Walter C. Guilder, of Wilmington, Vermont, an engineer, former toolmaker and model-boat enthusiast designed his plain-turning (non-screwcutting) "Guilder Model Builder " miniature lathe of 3" swing and 5" between centers to be as useful as possible for the home hobbyist who required several power tools in one tiny package. 荷兰盾模型的建设者- 在20世纪30年代Walter先生长荷兰盾，威明顿，佛蒙特州，工程师，前模具和模型船爱好者设计的，他平原-转折（非screwcutting ） “荷兰盾模型Builder的”微型车床3 “回旋和5 “之间的中心一样有用可能为首页爱好者谁需要几个电动工具在一个微小的封装。 The machine was therefore designed to be a compact, self-contained unit and, although available on "plain legs" for drive by the customer's own motor, in its more complete form the lathe was mounted on supports attached to a plate which held a factory-fitted double-shaft motor which drove both the 0.25" bore headstock spindle and, simultaneously from its other end, a 0.25" capacity drill press mounted at the tailstock end of the bed. 机器，因此，设计为一个紧凑，自我包含的单位，虽然可在“平原腿”为驱动器由客户自己的汽车，在其更完整的形式车床安装在支持连接到一个板举行了工厂-装有双主轴电机驱车均0.25 “膛headstock主轴，同时从它的另一端，一个0.25 ”的能力，钻床安装在尾架年底的床上。 An electrical switch was built neatly into the bed casting just in front of the headstock. 一电气开关建整齐地到床上，铸造刚才在前面的headstock 。
Included in the Guilder Model Maker's specification was the ability to mount - without the use of tools and all driven by one rear-mounted motor - various accessories, amongst which were: a drill press, a circular saw (which one owner described as, " accurate and useful "), a jig saw, disc sander and table, sanding drum, fixed steady (listed as an "extension roller rest") and a vertical-milling slide. 包括在荷兰盾的模型制造商的规格是能够挂载-无需使用工具和所有驱动一后方展开电动机-各种配件，其中包括：钻床，圆锯片（其中一名业主形容为“ 准确的和有用的 “ ） ，跳汰机看到，光盘桑德和表，砂光鼓，固定稳定（被列为”延长辊休息“ ）和一个垂直铣幻灯片。 The commercial potential of the design was recognized by WF Crosby, a navel architect of Pelham Manor, New York, and, with his backing, production began at some unknown date in the mid 1930s; by 1949 manufacture had been transferred to HE Greene & Son, also in Wilmington, where it continued until the mid 1950s. 商业潜力的设计是公认的白表克罗斯比，脐橙建筑师pelham庄园，纽约，并与他的后盾，生产开始在一些未知的日期在20世纪30年代中期;由1949年的生产已转移到他与格林的儿子，也是在威尔明顿，在那里一直持续到20世纪50年代中期。 (Description courtesy of Tony Griffiths, ) （说明礼貌托尼雪， ）
|
楼主
