马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。
您需要 登录 才可以下载或查看，没有账号？立即注册
x
本帖最后由 超级盾 于 2016-3-1 18:28 编辑
JetSpecs Designer涡喷计算小程序
说明
This is a plain language EULA that you must actually read, understand and agree to before you can use the software. Warning: Gas turbines are dangerous high speed, high energy machines. There is a serious risk of catastrophic turbine or compressor wheel failure due to over-speed, over-temp or foreign object ingestion. Catastrophic failure can result in damage to property injury or death. Home built gas turbine engines typically have full authority manual engine controls. This means the operator has absolute control of the fuel flow and can easily overheat and/or over speed the turbine with catastrophic results. - You have been warned, it's up to you to protect your own safety and the safety of those around you. This software is provided free of charge for entertainment only and may be freely distributed in its unaltered form. Reverse engineering, alteration or modification is expressly forbidden. The purpose of the 'JetSpecs Designer' software is to propose figures for discussion based on user input and basic arithmetic calculations. This software was written for amusement and has not been engineered, tested, verified or approved by anyone. This software is not considered to be fit for any particular purpose and should not be used for machine design. The author makes no claims to the accuracy or suitability of the software for any purpose whatsoever. Buy clicking the 'I agree' button below and/or by using this software you agree to this EULA in its entirety and you agree to take it upon yourself to verify the accuracy of, and to determine the suitability of the programs output. You further agree to hold harmless anyone associated with the software including the author, the supplier and the distributor.
JetSpecs Designer涡喷计算小程序
JetSpecs Designer涡喷计算小程序
JetSpecs Designer涡喷计算小程序
回复后下载：
|
[复制链接]
发表于 2016-3-1 18:23:09
千斤顶
发表于 2016-3-2 00:09:42
发表于 2016-3-2 19:31:05
发表于 2016-3-3 04:21:26
