请叫我雷锋 发表于 2017-10-15 13:47:41

《Machining of Complex Sculptured Surfaces》

本帖最后由 请叫我雷锋 于 2017-10-15 18:33 编辑

《Machining of Complex Sculptured Surfaces》
复杂复杂曲面的加工
编者：
J. Paulo Davim
Department of Mechanical Engineering
University of Aveiro
出版社：Springer
出版时间：2012年






目录
1 Flank Milling of Complex Surfaces. . . . . . . . . . . . . . . . . . . . . . . . 1
D. Olvera, A. Calleja, L. N. López de Lacalle,
F. Campa and A. Lamikiz
2 5-Axis Flank Milling of Sculptured Surfaces . . . . . . . . . . . . . . . . . 33
Johanna Senatore, Frédéric Moniès and Walter Rubio
3 High Performance 5-Axis Milling of Complex
Sculptured Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Yaman Boz, S. Ehsan Layegh Khavidaki, Huseyin Erdim and
Ismail Lazoglu
4 Milling Tool-Paths Generation in Adequacy with Machining
Equipment Capabilities and Behavior. . . . . . . . . . . . . . . . . . . . . . 127
Matthieu Rauch and Jean-Yves Hascoët
5 Intelligent Optimisation of 3-Axis Sculptured Surface
Machining on Existing CAM Systems . . . . . . . . . . . . . . . . . . . . . . 157
G.-C. Vosniakos, P. G. Benardos and A. Krimpenis
6 Process Planning for 5-Axis Milling of Sculptured Surfaces
Based on Cutter’s Accessibility Analysis . . . . . . . . . . . . . . . . . . . . 191
L. Geng and Y. F. Zhang
7 Manufacturing of Sculptured Surfaces Using EDM
and ECM Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
Adam Ruszaj and Wit Grzesik
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253

专业书籍
下载地址：（回复后可见）
**** Hidden Message *****

璀璨星空 发表于 2017-10-22 20:23:12

谢谢。

御锋 发表于 2018-8-8 15:03:29

谢谢

qfahc 发表于 2019-8-2 20:52:21

Perfect，thanks a lot.

mogudeng 发表于 2020-5-29 13:09:38

楼主好人，一生平安

fran001 发表于 2021-3-21 09:22:55

学习一下，谢谢

o0o 发表于 2022-10-15 18:35:14

谢谢啊

789 发表于 2023-8-10 09:57:04

感谢分享

789 发表于 2023-8-10 10:00:02

感谢分享
页: [1]
查看完整版本: 《Machining of Complex Sculptured Surfaces》