JetSpecs Designer涡喷计算小程序
本帖最后由 超级盾 于 2016-3-1 18:28 编辑JetSpecs Designer涡喷计算小程序
说明
This is a plain language EULA that you must actually read, understand and agree to before you can use the software. Warning: Gas turbines are dangerous high speed, high energy machines. There is a serious risk of catastrophic turbine or compressor wheel failure due to over-speed, over-temp or foreign object ingestion. Catastrophic failure can result in damage to property injury or death. Home built gas turbine engines typically have full authority manual engine controls. This means the operator has absolute control of the fuel flow and can easily overheat and/or over speed the turbine with catastrophic results. - You have been warned, it's up to you to protect your own safety and the safety of those around you. This software is provided free of charge for entertainment only and may be freely distributed in its unaltered form. Reverse engineering, alteration or modification is expressly forbidden. The purpose of the 'JetSpecs Designer' software is to propose figures for discussion based on user input and basic arithmetic calculations.This software was written for amusement and has not been engineered, tested, verified or approved by anyone.This software is not considered to be fit for any particular purpose and should not be used for machine design. The author makes no claims to the accuracy or suitability of the software for any purpose whatsoever. Buy clicking the 'I agree' button below and/or by using this software you agree to this EULA in its entirety and you agree to take it upon yourself to verify the accuracy of, and to determine the suitability of the programs output. You further agree to hold harmless anyone associated with the software including the author, the supplier and the distributor.
回复后下载：
**** Hidden Message *****
好东西，下来看看 先下了看一看，不知道是那里设计的，对我们自己DIY有没有什么好处。
JetSpecs Designer涡喷计算小程序 学习一下！谢谢！！！！！！！！！！！！！！ 学习一下！！！谢谢！！！！！！！！！！！！！！！！！ 微型涡喷发动机建模与控制的研究 向前辈学习一下:) 楼主辛苦，下来看看。神器在手，天下我有！ 先下了看一看，不知道是那里设计的，对我们自己DIY有没有什么好处。